would you mind try to create a windows 10 USB installation media following this instructions?
1) download a windows 10 iso using Microsof tool:
http://go.microsoft.com/fwlink/?LinkId=691209
select the proper windows 10 version (the same installed on your laptop) and choose to save it as iso file when prompted
2) download Rufus:
http://rufus.akeo.ie/?locale=en_US
plug your USB flash drive, run Rufus then:
select ISO image from the dropdown menu near "Create a bootable disk"
click on the little icon on the right and browse to the windows 10 downloaded iso file
as Partitions scheme select "GPT partition scheme for UEFI"
as File system select "FAT32"
click on Start
wait until it finish, then uplug your USB flash drive
3) backup all your personal data
4) Reboot to BIOS, pressing F2 at boot, then press F9 to load default and F10 to save and exit
5) plug your USB flash drive and at boot press F12 (if F12 doesn't work, see if it auto-recognise the USB flash drive or press F2 to enter BIOS and enable F12 boot menu under BOOT tab), choose the USB flash drive as bootable device